GF9 Rapid Cure - Hobby Glue Accelerator - GF9 Rapid Cure is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. GF9 Rapid Cure in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with GF9 Rapid Cure significantly enhances a joint's strength. For difficult to bond materials, GF9 Rapid Cure can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. GF9 Rapid Cure activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam. The surface properties of some materials, such as being acidic or having very low moisture content, slow down the curing of cyanoacrylates. CA accelerator is formulated to harden CA in ten seconds or less. Accelerator allows large gaps to be filled in loose fitting joints and cures the excess CA that sometimes oozes out of joints so that objects can be handled within seconds without the worry of sticking your fingers to the parts. 2 oz. Bottle Not available for mail order sales overseas. - GF9 Gale Force Nine